Description
The water pump drive retaining ring is a retaining ring used to hold the drive component in place in the water pump. It is an external retaining ring that fits into a groove or recess on the outer surface of the water pump housing, securing the drive component and preventing it from moving axially during operation.
Features
- Ensures a tight, reliable fit.
- Able to withstand maximum forces and loads.
- Non-corrosive.
Applications
The water pump drive retaining ring is a key component in the water pump, used to ensure the proper positioning and securing of the drive component.
Specifications
| Material | Carbon Steel |
|---|---|
| Free Diameter – A | 0.55 in |
| Snap Ring Type | External |
| Thickness – B | 0.035 in |
| Material Description | Steel Retaining Ring |
| Cross Hole | Yes |
| Thickness | 0.89 mm |
| Remarks | Free Diameter: 13.97, Radial Wall: 1.93, Lug Height: 2.77, Groove Width: 1.03, Groove Diameter: 14.2, Shaft Diameter: 15.1 |
| Hole Diameter | 0.59 in |
Compatible Equipment
- Motor Graders: 120, 120H
- Generator Sets: C9
- Wheel Excavators: M320, M315
- Compactors: CS-583D, CS-533C, C-9
- Engines: C7, C13, C11
- Dozers: D5M, D6M
- Excavators: 325B L, 325B, 320B, 3126
- Wheel Loaders: 962G, 928G, 972H, 966H, 950H, 950G, 836
- Skid Steer Loaders: 3126B
Additional information
| Machine Model | 120, 120H, 3126, 3126B, 320B, 325B, 325B L, 836, 928G, 950G, 950H, 962G, 966H, 972H, C-9, C11, C13, C7, C9, CS-533C, CS-583D, D5M, D6M, M315, M320 |
|---|---|
| Equipment Type | Excavators, Wheel Excavators, Wheel Loaders, Skid Steer Loaders, Dozers, Motor Graders, Compactors, Engines, Generator Sets |
| Part Source | Genuine OEM |
