Description
Service part for the crankcase breather assembly, which provides a path for gases to escape from the crankcase and filters the gases, oil, and water produced by combustion.
Features
- Molded rubber hose
- Inside Diameter 1: 50.8 mm (2 in)
- Inside Diameter 2: 50.8 mm (2 in)
- Inside Diameter 3: 60.3 mm (2.37 in)
Applications
Hose used in the crankcase breather assembly. Refer to your Operation and Maintenance Manual or contact MECHSC for more information.
Specifications
| Hose Warning | Improper selection of hose and coupling combinations will void the warranty and may result in serious personal injury or death, property damage, or failure of components and machine systems. Cat® hose assembly products are designed and tested as a system to provide reliable connections that maximize hydraulic system safety and reliability. In addition, properly maintained, appropriate Caterpillar tooling is recommended to ensure hoses are crimped to technical specifications. Using Caterpillar hose with another manufacturer's couplings, or Caterpillar couplings with another manufacturer's hose, may result in unreliable, unsafe, or poorly performing hose assemblies. Caterpillar does not recommend or authorize this practice. For more information, refer to SAE J1273 Section 6.3 and ISO 17165-2 Section 6.3. |
|---|
Compatible Equipment
- Generator Sets: 3516C, 3512B, 3512E, G3516, C4.4
- Motor Graders: 3606
- Track Loaders: 995, 994K
- Engines: C32
- Excavators: 3516B, 3508B, 3512C, 3516E, 6060
- Off-Highway Trucks: 785, 789D, 777, 777D, 785D, 789, 793D, 793
