Description
Relative position of components. A cotter pin is used to secure a clevis bolt or lock a castle nut. The cotter pin has two long bent prongs to lock it in place. Hairpins, round clips and ring clips do not bend in use. These pins are easy to install and remove and are suitable for light-load applications.
Specifications
| Retaining Pin Type | Cotter Hair |
|---|---|
| Wire or Pin Diameter | 6.3 mm (0.248 in) |
| Pin Length | 80 mm (3.15 in) |
| Coating | Zinc Plated |
| Length | 80 mm (3.15 in) |
| Pin Diameter | 6 mm (0.25 in) |
| Remarks | Point Type: Mitered |
Compatible Equipment
- Motor Graders: 140 GC
- Cold Planers: PL83, PL87, PL72
- Dozers: D3K2 LGP, D1
- Excavators: 6040, 120 GC, 6060, 3508B, 6030
- Wheel Loaders: 950 GC
- Off-Highway Trucks: 7495
- Asphalt Pavers: AP-600D
Additional information
| Machine Model | 120 GC, 140 GC, 3508B, 6030, 6040, 6060, 7495, 950 GC, AP-600D, D1, D3K2 LGP, PL72, PL83, PL87 |
|---|---|
| Equipment Type | Excavators, Wheel Loaders, Dozers, Motor Graders, Off-Highway Trucks, Asphalt Pavers, Cold Planers |
| Part Source | Genuine OEM |
