161-1838 Hydraulic Hose
Cat® Hydraulic Hose (Bulk) (XT-6 ES)
Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment
Fitment data not listed — send us your machine model or serial number to confirm.
Description
Caterpillar XT-6 ES (Enhanced Spiral) hose exceeds SAE 100R15 requirements for reliable hose and coupling performance, greatly extending your equipment uptime. Thanks to Caterpillar's proprietary, exclusively formulated cover, Cat XT-6 ES hose offers up to 20 times the abrasion resistance of premium rubber-covered hoses in the industry. Cat XT ES has a working bend radius half that of the SAE bend radius without sacrificing cold flexibility. This hose is suited to hydraulic systems with high surge peaks that demand great resistance to repeated flexing and cyclic pressure impulses.
Features
- Hose Inside Diameter: 38.1 mm (1.500 in)
- Hose Dash Size: -24
- Hose Outside Diameter: 58.1 mm (2.29 in)
- Minimum Burst Pressure: 165475 kPa (24000 psi)
- Maximum Working Pressure: 41370 kPa (6000 psi)
- Minimum Bend Radius: 267 mm (10.47 in)
- Temperature Range: -40° C to +121° C (-40° F to +250° F)
- Bulk Unit of Measure: Inch
- Fabric-reinforced synthetic rubber tube; four or six spiral-wrapped layers of high-tensile steel wire reinforcement separated by synthetic rubber layers. Synthetic rubber cover is oil-, weather- and abrasion-resistant.
- For clamp-style reusable skive couplings or crimp-style permanent skive couplings
Applications
Conveys petroleum-based hydraulic fluid at extremely high pressure. The housing is MSHA approved. Refer to your Operation and Maintenance Manual or contact MECHSC for more information.
Specifications
| Material | High Pressure Hose |
|---|---|
| Hose Warning | Improper selections of hose and coupling combinations will void warranties and may result in serious personal injury or death, property damage, or component and machine system failure. Cat® hose assembly products are designed and tested as a system to achieve a reliable connection, thus maximizing hydraulic system safety and dependability. It is also recommended that appropriate and properly maintained Caterpillar tooling is used to ensure hoses are crimped to specifications. Use of Caterpillar hose with other manufacturer's couplings or the use of Caterpillar couplings with other manufacturer's hose may result in the production of unreliable, unsafe or under-performing hose assemblies. It is not recommended or authorized by Caterpillar. For additional information see SAE J1273 section 6.3 and ISO 17165-2 section 6.3. |
| Bulk Unit of Measure | IN |
Additional information
| Part Source | Genuine OEM |
|---|
