122-6872 Hydraulic Hose
Cat® Hydraulic Hose (Bulk) (716)
Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment
Description
Caterpillar 716 (single-wire braid) hose exceeds SAE 100R1 Type AT requirements for optimum reliable hose and coupling performance. This hose is impulse tested in both unaged and aged conditions up to 2.5 times the number of cycles required by SAE to ensure reliable performance. Caterpillar 716 hose meets European DIN 20022 1SN dynamic working pressure and temperature standards.
Features
- Hose Inside Diameter: 19.1 mm (0.75 in)
- Hose Dash Size: -12
- Hose Outside Diameter: 28.6 mm (1.13 in)
- Minimum Burst Pressure: 34474 kPa (5000 psi)
- Maximum Working Pressure: 8619 kPa (1250 psi)
- Minimum Bend Radius: 241 mm (9.49 in)
- Temperature Range: -40°C to +135°C (-40°F to +275°F) for petroleum-based hydraulic oils; -40°C to +135°C (-40°F to +275°F) for petroleum-based DIN hydraulic oils; up to +85°C (up to +185°F) for air, water or water-glycol; -40°C to +70°C (-40°F to +158°F) for all other applications.
- DIN 20022 1SN Maximum Working Pressure: 105 bar (1523 psi)
- Bulk Unit of Measure: Inch
- Special high-temperature synthetic rubber tube; single high-tensile steel wire braid reinforcement. Oil-, weather- and abrasion-resistant synthetic rubber cover
- For use with crimp-type permanent non-skive connectors
Applications
Conveys high-temperature petroleum-based hydraulic fluid, hot oil, grease, lubricants, and crude oil at medium pressure. The housing is MSHA approved. U.S. Coast Guard approved 46CFR56.60-25C. Refer to your Operation and Maintenance Manual or contact MECHSC for more information.
Specifications
| Material | Medium Pressure Hose |
|---|---|
| Bulk Unit of Measure | IN |
| Hose Warning | Improper selections of hose and coupling combinations will void warranties and may result in serious personal injury or death, property damage, or component and machine system failure. Cat® hose assembly products are designed and tested as a system to achieve a reliable connection, thus maximizing hydraulic system safety and dependability. It is also recommended that appropriate and properly maintained Caterpillar tooling is used to ensure hoses are crimped to specifications. Use of Caterpillar hose with other manufacturer's couplings or the use of Caterpillar couplings with other manufacturer's hose may result in the production of unreliable, unsafe or under-performing hose assemblies. It is not recommended or authorized by Caterpillar. For additional information see SAE J1273 section 6.3 and ISO 17165-2 section 6.3. |
Compatible Equipment
- Generator Sets: 3516C
- Motor Graders: 140G
- Track Loaders: 824C, 826H, 834H, 826K
- Compactors: CC2.7 GC, 825K, 824K, CB2.9, CB2.5, CB2.5 GC, CB2.7 GC, CB2.7
- Engines: C32, C27, C175-16
- Excavators: 637E, 3512C
- Wheel Loaders: 992K
- Off-Highway Trucks: 789D, 777D, 797F
Additional information
| Machine Model | 140G, 3512C, 3516C, 637E, 777D, 789D, 797F, 824C, 824K, 825K, 826H, 826K, 834H, 992K, C175-16, C27, C32, CB2.5, CB2.5 GC, CB2.7, CB2.7 GC, CB2.9, CC2.7 GC |
|---|---|
| Equipment Type | Excavators, Wheel Loaders, Track Loaders, Motor Graders, Off-Highway Trucks, Compactors, Engines, Generator Sets |
| Part Source | Genuine OEM |
