111-9373 Single Tube Half-Ring Saddle Clamp
Cat® 57.2 mm Diameter Single Tube Steel Half Saddle Clamp (with Strap)
Description
The single-tube half-loop saddle clamp is used to secure a tube in a fixed position. Its saddle fits over the tube, and a bolt or screw tightens the saddle down onto the tube to hold it firmly in place. This clamp assembly consists of a saddle clamp and a band, with the band welded to the clamp for additional support. They are commonly used where mounting a tube directly to a surface is impossible or undesirable, such as when the surface is uneven or irregular.
Attributes
- For clamping tubes with an outside diameter of 57.2 mm
- Comes with 2 mounting holes and a hoop for use with 3/8" fasteners
- Provides a band with a minimum weld length of 20 mm to lock the clamp and prevent it from rotating or loosening.
Applications
The single-tube half-loop saddle clamp, together with the other half-loop clamp, is used to secure a tube in the oil line by means of a band and fasteners.
Specifications
| Mounting Hole Spacing | 119 mm (4.68 in) |
|---|---|
| Fits Bolt Size | M10 mm (3/8 in) |
| Inside Diameter | 57.2 mm (2.25 in) |
| Length | 143 mm (5.62 in) |
| Material Thickness | 4 mm (0.15 in) |
| Width | 26 mm (1.02 in) |
Compatible Equipment
- Generator Sets: G3516C, 3516C, 3512B, 3512E
- Excavators: 3516E, 6060, 3516B, 3508B, 3512C
- Off-Highway Trucks: 789D, 789, 793D, 785D, 785, 777D, 793
