262-3764 Hall Effect Dual Speed Sensor
Cat® Active Hall Effect Dual Speed Sensor
Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment
Description
The Cat Hall-effect dual sensor has 2 Hall-effect elements. The elements are spaced to produce waveforms that are 90° (electrical degrees) out of phase. The target gear must be designed to match the Hall cell spacing, or the Hall cell spacing must be designed to match the pitch of the target gear teeth. This enables direction detection. Signal A leads signal B, or vice versa.
Features
- Two Hall-effect elements
- Two outputs, 4 wires (power, return, signal A, signal B)
- Phase shift between the two output signals provides direction
- Available in fixed nose length version only
Applications
- For applications requiring detection of zero or near-zero speed.
- Hydraulic steering motor
Specifications
| Material | Stainless Steel |
|---|---|
| Hole Diameter | 15.15 mm (0.60 in) |
| Lead Length | 300 mm (11.81 in) |
| Overall Length | 74.9 mm (2.95 in) |
| Insert Length | 49.02 mm (1.93 in) |
Compatible Equipment
- Motor Graders: 120, 140 GC
- Compactors: CB-44B
- Engines: C32
- Excavators: 120 GC
- Skid Steer Loaders: 242D3, 262D3, 262D, 246D, 236D3, 232D3, 279C, 236D, 232D, 246D3, 272D3, 226D3, 272D3 XE, 246C, 262C
