8T-4813 82.55 ID Rod Guide Ring
Cat® 82.55 ID rod guide ring used in lift cylinders.
Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment
Description
The rod guide ring, also called a wear ring or guide ring, is a component in lift cylinders used to guide the piston rod and absorb side loads. The guide ring is typically made of a non-metallic material such as PTFE, which resists wear. The guide ring is installed in the cylinder head and provides a low-friction surface for the piston rod to slide on
Attributes
● Withstands varying pressures and temperatures
- Angle-cut split design for easy assembly
Applications
The rod guide ring is used to seal the gap between mating parts, primarily on Cat 836 Compactors, 973, 973C, and 983 Track-Type Loaders, and D8L, D9G, D9H, D9L, D9N, and D9R Track-Type Tractors.
Specifications
| Groove Width – A (+/- 0.0762 mm) | 41.00 mm |
|---|---|
| Groove Diameter – B (+/- 0.001 in) | 3.45 in |
| Groove Width – A (+/- 0.003 in) | 1.61 in |
| Groove Diameter – B (+/- 0.0254 mm) | 87.63 mm |
| Rod Diameter | 82.55 mm (3.25 in) |
| Axial Thickness | 40.49 mm |
| Groove Diameter | 87.63 mm (3.45 in) |
| Groove Width | 41 mm (1.61 in) |
| Inside Diameter | 82.55 mm (3.25 in) |
| Material | Plastic Plastic |
| Outside Diameter | 87.55 mm (3.45 in) |
| Radial Thickness | 2.5 mm |
| Weight | 0.04 kg (0.09 lb) |
Compatible Equipment
- Dozers: D9L
- Wheel Loaders: 836
Additional information
| Machine Model | |
|---|---|
| Equipment Type | |
| Part Source | Genuine OEM |
