497-8286 25.4 mm ID Hose Fitting

Cat® Fluid-Carrying Hose Fitting Two-Bolt Clamp Flange, Zinc Plated Steel, -16XN Permanent Hose Coupling, Fitting Type: -16 Code 61 Flange to Hose Fitting

Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment

Fitment data not listed — send us your machine model or serial number to confirm.

SKU: 497-8286 Category:

Description

Cat hose fittings (such as 497-8286) meet extremely high quality and reliability standards. These zinc plated steel fittings are manufactured to strict tolerances to ensure a leak-free connection. Each hose connector meets or exceeds industry standards for working pressure, assembly torque capability, and corrosion protection, ensuring long-lasting, reliable machine operation.

Features

  • Wetted parts
  • Meets or exceeds industry-standard part performance and provides a leak-free connection
  • Material: Plated Steel
  • Type: -16XN Permanent Hose Coupling
  • Fitting Type: -16 Code 61 Flange to Hose Fitting
  • Shape: 22.5°
  • Length: 136 mm (5.36 in)
  • Skive Factor: 66 mm (2.58 in)
  • Images provided are for reference only. Connector construction may differ slightly from the image shown, but this part is interchangeable with the OEM part.

Applications

Connectors are designed to connect fluid-carrying hoses and rigid tubes to other system components. Refer to your Operation and Maintenance Manual or contact MECHSC for more information.

Specifications

Hose WarningImproper selection of hose and coupling combinations will void the warranty and may result in serious injury or death, property damage, or component and machine system failure. Cat® hose assembly products are designed and tested as a system to achieve reliable connections, maximizing hydraulic system safety and reliability. In addition, use of properly maintained, appropriate Caterpillar tooling is recommended to ensure hoses are crimped to specification. Using Caterpillar hose with another manufacturer's couplings, or Caterpillar couplings with another manufacturer's hose, may result in hose assemblies that are unreliable, unsafe or perform poorly. Caterpillar does not recommend or authorize this practice. For more information, refer to SAE J1273 Section 6.3 and ISO 17165-2 Section 6.3.
Connection StandardCode 61 Flange-SAE J518-1
Bend Angle22.5 Degrees
Hose Inside Diameter25.4 mm (1 in)
Hose Fitting CategoryXN
Connection Nominal Size16
Type-16XN Permanent Hose Coupling
Connector Type-16 Code 61 Flange to Hose Fitting
Shape22.5°
Drop Length11 mm (0.43 in)
Cutoff Factor66 mm (2.58 in)
Length136 mm (5.36 in)
Recommended Hose Size25 (No-Skive) mm (1.00 (No-Skive) in)
CompatibleSAE 100R12, SAE 100R13, SAE 100R15

Additional information

Part Source

Genuine OEM