096-0067 Cross-Drilled Clevis Pin
Cat® clevis pin with cross hole for yoke end rods in governor and parking brake controls
Wholesale only · Full payment before shipment · Send your machine nameplate to confirm fitment
Description
A clevis pin with cross hole is a solid cylindrical pin with a cylindrical head mitered on one end, and a drilled hole at the headless end for placing a clevis pin. Suitable for use with clevis pins.
Cat® fasteners and hardware are designed for specific applications based on size, strength, clamp load and past performance, information other manufacturers do not have. They are carefully selected to last until machine rebuild or end of life. Non-Cat hardware and fasteners may appear to fit your machine, but no one else knows your equipment the way we do.
Features
- Cat fasteners and hardware are manufactured to precise specifications for durability, reliability and high efficiency
- Strength and Quality – Fasteners meet or exceed ISO, ASTM, ASME and SAE requirements
- Coating meets the special requirements of different applications (RoHS compliant)
Applications
- Cat fasteners and hardware are trusted to build, maintain or repair most machines and shop applications worldwide
Specifications
| Material Description | Steel – Pins and Dowels |
|---|---|
| Cross Hole | 1.6 |
| Pin Length – B | 18.8 in |
| Head Diameter | 9.8 mm |
| Remarks | Pin Diameter: 5.96, Length to Cross Hole: 15 |
| Coating | Zinc Electroplated (96 Hour Salt Spray Test) |
| Head Height | 2 mm |
| Material | Low Alloy Steel |
| Pin Type | Cross Hole |
| Pin Diameter | 5.96 mm (0.235 in) |
| Pin Length | 18.8 mm (0.74 in) |
Compatible Equipment
- Track Loaders: 993, 824G, 826H, 834H, 826G
- Compactors: CC2.7 GC, CB2.5 GC, CB2.7 GC, CB-34B, CB-36B, CC-34B, CB-24B, CB2.7, CB2.5, CB2.9
- Wheel Loaders: 992K, 966 GC
